|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
| Cleaners & Sealers | ||
| Efflorescence Remover and General Cleaner |
|
|
| Specially formulated to dissolve efflorescence (whitish salt) and remove ground-in dirt (traffic marks, etc.) on pavers, slabs and retaining walls made of concrete. Containing no hydrochloric (muriatic) acid, it works deep without discoloring or damaging the surface. It brightens up the color, cleans evenly and enables protectors to better penetrate the material. |
 |
|
| 1 Gallon Cleans approximately 200 sq ft. | ||
| #50605
|
1 Gal. | |
| Hardscape Cleaner |
|
|
| Formulated to remove ground-in dirt from the surface of most hardscape materials such as concrete pavers, slabs and walls, natural stone, poured or stamped concrete, etc. Non-corrosive, works without damaging or discoloring the material. t brightens up the color, cleans evenly and enables protectors to better penetrate the material. It is recommended for bare and previously sealed surfaces. |
 |
|
| 1 Gallon Covers upto 800 sq ft | ||
| #50117
|
1 Gal. | |
| Gator Dust Bond |
|
|
| A unique mixture of polymer
binders and calibrated crushed stone. Once Gator Dust sets, it becomes
very firm and locks between the stone joints. This firm bond maintains
the stones securely in place, being equally effective on both horizontal and
sloped surfaces. The quantity required depends on the shape and size of the stones as well as the width of the joints. One 50 lb. bag will cover between 20 to 30 square feet if the joints are about 1" to 2" wide and the stones are about 2" to 2.5" thick. |
 |
|
| Ideal for joints that are a minimum of 1/2" to a maximum of 4" wide. | ||
| #50718 |
50 lb. bag | |
| Paver Seal - NL (Natural Look) |
|
|
| Protects without changing the appearance. Soaks into the material. Won't make the surface slippery. Protects against oil, water and dirt. Makes surface easier to clean. Can be applied immediately after paver installation. Also recommended for natural stones and retaining walls. |
 |
|
| Natural look. | ||
| #50575
|
1 Gal. | |
| Paver Seal - WL (Wet Look) |
|
|
| To preserve the original beauty of concrete paving stones and resist wear, stains and water, sealing is recommended. A solvent based acrylic sealer, Paver Seal-WL imparts a lustrous sheen, intensifies color and provides water and stain resistance to concrete pavers. |
 |
|
| Glossy look. | ||
| #50503 #50086 |
1 Gal. 5 Gal. |
|
| Stabilizer Sand - Polymeric |
|
|
| A high-tech mix of graded sand and binder, specially formulated for the filling of joints when installing pavers or slabs, or when replacing existing joints. Unlike conventional sand, it stays in place and remains stable. |
 |
|
| 50 lb. bag Available in 2 colors - beige and grey |
||
| #50749 #50750 |
Beige Grey |
|
| Rust Stain Remover |
|
|
| Eliminates rust stains on concrete pavers. It effectively dissolves stains caused by rusted metal, steel streaks, fertilizer granules, etc. Contains no hydrochloric (muriatic) acid and won't discolor your pavers. | ||
| #50015 | 1 Quart | |
|
|
or (631) 289-3500. © Copyright 2011 Bissett Nursery Corp.