|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
| Concrete - Mortar | |||
![]() |
|||
| Gravel Mix |
Acecrete |
||
| single component
product, consisting of Portland Cement (ASTM C-150, Type 1A), finely graded
sand (ASTM C-33) and sized natural gravel (ASTM C-33), scientifically
blended to a uniform mixture Uses: - For concrete 2" thick or more - Footings and foundations - Walls and floors - Walks and patios - Steps and platforms - Driveways - Poles and stanchions |
|||
|
|
|||
| #50882 | 80 lb. | ||
| Mortar Mix |
Acecrete |
||
| Single component
product, consisting of Masonry Cement (ASTM C-91) and finely graded Mason
Sand (ASTM C-144), scientifically blended to a uniform mixture. Uses: - Brick, block or stone walls - Stucco - Repair of all masonry systems - Interior or exterior - Above or below grade |
|||
|
|
|||
| #50883 | 80 lb. | ||
| Sand Mix |
Acecrete |
||
| Single component
product, consisting of Portland Cement (ASTM C-150, Type 1A) and graded sand
(ASTM C-33), scientifically blended to a uniform mixture. Uses: - Topping mix 2" and under - Raise interior floors prior to tiling (mud job) - Interior or exterior, above or below grade - Concrete floors, driveways, walkways, steps and patios |
|||
|
|
|||
| #50884 | 80 lb. | ||
|
|
|||
| Portland |
Type I |
||
| General purpose cement suitable for all uses where special properties of other types of portland cement are not required. |
![]() |
||
|
|
|||
| #50879
|
94 lb. | ||
| Dark Mortar |
Type DM |
||
| #50880
|
70 lb. | ||
| Light Mortar |
Type N |
||
| Recommended for exterior above grade load-bearing walls and interior load-bearing walls. |
![]() |
||
| #50881
|
70 lb. | ||
|
|