| Pumps - High Efficiency |
| Pump - AquaSurge™ |
|
Designed to
operate in larger ponds.
- Robust, reliable, efficient, and quiet!
- Low electrical operating cost
- Fish safe – uses no oil
- Includes one 1.5" threaded coupler and one 90° elbow
- Can be used vertically or horizontally
- Recommended for use in a skimmer pre-filter or MicroSnorkel Pondless
Waterfall Vault |
 |
20 foot
power cord. 3 year warranty.
|
| |
Model |
Discharge |
Watts |
Max Head |
|
| #23957 |
2000 GPH |
1.0" |
250 |
27' |
98125 |
| #22126 |
3000 GPH |
1.5" |
180 |
15' |
99546 |
| #22128 |
4000 GPH |
1.5" |
220 |
16.5' |
99547 |
| #22132 |
5000 GPH |
1.5" |
250 |
19.5 |
99548 |
| #21049 |
7000 GPH |
2" |
700 |
22 |
98484 |
|
| AquaSurge
Conversion Kit |
29705 |
| The AquaSurge
Conversion Kit contains the parts necessary to convert any Aquascape Pro
pump to the AquaSurge Pump using your existing check valve assembly and
Aquascape skimmer. The kit includes: 1.5" male thread x 2" slip adapter
and 2" Aquascape check valve adapter. |
|
| #23882 |
|
|
| Pump
ADI-1000 |
20006 |
- Watts - 1200
- Volts - 115
- Max Amps - 11.5
- Operating Cost - $87.55/mo.
- Vertical Shut-off - 29'
- Discharge - 3" Female
- Cord length - 15' |
 |
| Rated flow -
10,700 GPH. |
#22174
|
|
(37 lbs.) |
| Pump - Tsurumi -
PN |
|
| Tsurumi
Submersible Pumps for Professional Water Feature Applications are energy
efficient pumps and designed for continuous duty applications, known for
their reliable operation. All PN pumps have a suggested pipe diameter of
2" and have a 2" female discharge and run on 115 volts with a 32 ft. cord. |

|
| |
Model |
Watts |
Max Head |
Rated Flow |
Weight |
| #23633 |
50PN-2.25S (3PN) |
479 |
30' |
3630 |
(23 lbs.) |
| #23636 |
50PN-2.4S (4PN) |
655 |
44' |
4740 |
(24 lbs.) |
| #23639 |
50PN-2.75S (8PN) |
924 |
56' |
5520 |
(29 lbs.) |
| #23287 |
12PN |
1032 |
|
10000 |
|
|
| Tsurumi Check
Valve Adaptor Kit |
29652 |
| Fittings required
to convert an existing Aquascape Pro check valve over to a Tsurumi pump. |
 |
| 2" |
#22580
|
|
(8 oz.) |
| Pump - Tsurumi -
PL |
|
Tsurumi’s
engineers have designed our new pump line to be hydraulically dialed into
the typical lower head water garden applications. This helps ensure
that the pump is performing in its ideal operating range resulting in less
vibration and wear and tear on the pump, ultimately resulting in longer pump
life.
Large 1.5” intake handles bigger solids and reduces maintenances over the
current Tsurumi PN and Aquascape Pro Pumps. |

 |
| |
Model |
Watts |
Max Head |
Rated Flow |
Weight |
| #23015 |
50PL-2.25S (3PL) |
328 |
14' |
3000 |
(17 lbs.) |
| #21816 |
50PL-2.4S (5PL) |
660 |
22' |
5000 |
(19 lbs.) |
| #21917 |
50PL-2.75S (9PL) |
987 |
35' |
6800 |
(23 lbs.) |
|
| Pump - Statuary |
|
Statuary Pumps
are available in 75, 145 and 210 GPH. These pumps are perfect for
smaller decorative fountains and spitters!
- Energy efficient
- 2-year warranty
- Flow control
- Cord length - 5'8" |
 |
| |
GPH |
Model |
Gal/Hr
at 2' |
Gal/Hr
at 4' |
Max
Head |
| #22487 |
75 |
17510 |
25 |
- |
2' |
| #22190 |
145 |
11400 |
135 |
20 |
4' |
| #22268 |
210 |
99534 |
190 |
110 |
10' |
|
| Pump - Ultra™ |
|
Ultra™ Pumps work
great for use in decorative features such as fountain heads, spitters, and
other brass or stone fountains.
- Inline or submersible
- Long-life rare earth magnet
- Vibration dampening, liner-safe rubber coating
- Energy efficient
- 12' Cord for 200-500, 25' Cord for 750-2000 |
 |
| |
GPH |
Model |
Thread
Size |
Watts |
Max
Height |
| #22271 |
350 |
13500 |
1/2" |
35 |
7' |
| #22394 |
500 |
15100 |
1/2" |
40 |
8' |
| #22397 |
750 |
17500 |
3/4" |
45 |
11' |
| #22187 |
1000 |
11000 |
3/4" |
50 |
14' |
| #20674 |
2000 |
98462 |
3/4" |
150 |
25' |
|
| Pond Cleanout Kit |
20005 |
-
Perfect for pond clean-outs and installation wash downs.
-
4200 gallons per hour for fast pump-outs!
-
Can draw water down to 1/4 inch from the bottom.
-
Includes 25 feet of flexible discharge hose and quick disconnect coupling. |
 |
| Clean out
pump, hose & connectors. |
#22179
#22393
|
Cleanout Kit
Extra 25' flexible hose |
|
| Pond Aerator |
99449 |
|
Comes with a small air compressor generating 19 cu. ft./hr. and uses 12
watts per hour, four 1/4" nipples, four 30' 1/4 inch air lines, & four
replaceable air-stone. Mount the aerator compressor in a dry location
and feed the air lines into your pond. During the warmer months, the
air stones should be in the deepest part of the pond to add oxygen to the
stagnant areas. This additional oxygen will help breakdown fish waste
and other decaying organic matter much quicker. During the cold winter
months, raise the air stones to a shelf that is around 12" from the surface.
This will keep the warmer water down in the bottom of the pond so your fish
won't freeze, but yet keep a hole open in the ice so the harmful gases from
the decaying organic matter can vent to the atmosphere. |
 |
Use it to
prevent icing-over in the colder weather for your outdoor pond.
Good for pond up to 1600 gallons. |
| #22916 |
|
|
|