Fixture Accessories
Solid Bronze Well Light Grate

CWLG1CB

Prevents larger plant material from contacting lamp.  Will withstand foot and vehicular traffic.  Secured by two 3/32” hex head set screws (included).

Solid bronze grate for all CAST Well Lights.
#22064
 
   
Solid Bronze Ring and Glass Lens for Well Light

CWLR1CB

Solid bronze ring with convex borosilicate glass lens for all CAST Well Lights.  Prevents plant material from contacting lamp.   Secured by two slotted thumbscrews.

 
#22297
 
 
Solid Bronze Mounting Canopy

CFM1CB

The solid bronze CAST Mounting Canopy can replace fixture stakes in applications where fixtures need to be mounted on a solid surface.

Solid Bronze, opening threaded 1/2" NPT .
#22256
 
 

(.5 lbs.)

Sprinkler Shield

CSPRS

Protects lamps in CAST Area/Path Lights from contact with water. Constructed from borosilicate glass with solid bronze base.  Notched to allow water to drain into fixture stem.  To insert, remove hat and place Sprinkler Shield over lamp.

Fits CMU1CB, CMU2CB, CCH1CB, CCH2CB and CNO1CB.
#23670

 

 

 

 
Installation Accessories
Digital Clamp-On Amp/Volt/Ohms Meter

CMETER

The CAST Digital Amp/Volt/Ohm Meter is the only reasonably priced meter calibrated for maximum accuracy at 12V AC - specifically engineered for landscape lighting applications.  The meter measures amperage, voltage and resistance.  On the back of the meter, a sticker lists maximum amperage capacity of landscape lighting wire types.  Includes test leads, carrying case and operating manual.

  Operating Manual
#22139

 

 
Spider Splice

CSS1

An enclosure for wire splices that is easily accessible for voltage testing and troubleshooting.  Uses in combination with pre-wired fixtures, it greatly simplifies installation.  The bronze cap is marked with the wire run number for ease of identification and system maintenance.  Even voltage distribution ensures that all lamps receive the optimal voltage for longer lamp life.

2.5" wide x 6" tall.
#22134
 
 
Industrial Wire Markers

CMPAD

Heavy duty labels for marking wire runs in the field.  Every installer should label both ends of every wire.  This wire labeling pad provides 10 pages of numbers 0 - 9.

 
#22139
 
 
Landscape Lighting Tool Kit

CTOOLKIT

Box shaped design prevents tipping.  Includes shoulder strap and multi-compartment plastic tray.  This toolkit contains a selection of the tools essential for landscape lighting installation and testing.

 
#22303

 

 
Black/Blue Waterproof Wire Nut

C61335

King DryConn® large black/blue waterproof connector with silicone sealant.  UL designation: KB UL 50 tested for watertight/raintight applications UL listed and CSA certified as a pressure type connector suitable for low voltage applications.

10 pack.
#22324
 
 
Tree Mount SS Hanger Bolts

CTREEH24

Stainless steel screws and nuts designed to offset bracket from tree surface. This prevents the growth of mold that can damage the tree.  Also included, a deep 3/8" drive socket.

Includes (24) sets of: (3) screws and (3) nuts.
#22300  
Transformer Installation Test Lug

CTESTLUG

The CAST Transformer Test lug has two purposes:
1. To allow the installer to connect all wire runs to the 12-volt tap during the initial voltage testing step.
2. In the event that the installation requires a large number of wires to connect to any one voltage terminal, this tool can be permanently installed to accommodate that.

#22431  
Voltage Testing Tool - Wedge Based

CTESTS8

This tool, a CAST-exclusive, allows you to test the voltage at an S-8 socket under full load.

 
#23257

 

 
Wire Spinner Turntable Dispenser

CSPIN

Wood and steel turntable engineered to hold and release a single 500' wire spool.

400 lb. capacity.
#22138


 

 
Wire Stripper - Automatic

CASTRIP1

CAST Automatic Wire Strippers are the best way to ensure quick and clean removal of stranded wire insulation without cutting or nicking strands.  Cushioned non-slip handle.

Strips #8 to #30 wire gauges.
#23897


 

 
 
Sales
CAST Small Sales Kit

CSK2

This rugged and professional kit carries a selection of CAST fixtures and includes a sales binder.  There's no better way to sell a CAST Lighting project than by putting CAST fixtures into the hands of the homeowner.
Sales Kit Contents:
  • (1) CAST MR-16 Bullet

  • (1) CAST Tree Light
  • (1) CAST Deck Light
  • (1) Small China Hat
  • (1) Small Mushroom Area/Path Light
  • (1) Sales Binder
  • Selling Point Sheets

22" wide x 9" high x 14" deep.
#22299  

(32 lbs.)

 
Testing Tools
Digital Clamp-On Amp/Volt/Ohms Meter

CMETER

The CAST Digital Amp/Volt/Ohm Meter is the only reasonably priced meter calibrated for maximum accuracy at 12V AC - specifically engineered for landscape lighting applications.  The meter measures amperage, voltage and resistance.  On the back of the meter, a sticker lists maximum amperage capacity of landscape lighting wire types.  Includes test leads, carrying case and operating manual.

  Operating Manual
#22139

 

 
MR-16 Voltage Testing Tool

CTESTMR-16

This tool is a CAST-exclusive and allows you to test voltage at an MR-16 socket under full-load.

 
#22430
 
 
 
Training
Landscape Lighting Book by Janet Moyer

MOYER

Recognized as the most comprehensive source of landscape lighting art and science, this 418-page hardcover book is a must-have for the serious landscape lighting professional.  The author, Janet Lenox Moyer, is one of the leading Landscape Lighting Designers in the nation.

418 pages.
#22575
 
 
 
Wire
Lighting Wire - #10-2 No-Ox™ Tin-Coated

 

CAST Lighting #10-2 No-Ox® Marine-Grade Tin-Coated low voltage landscape lighting wire is highly corrosion resistant and retains its conductivity far longer than all-copper wire.  Wire is wound and shrink-wrapped in 500 ft. spools.  Marked with feet remaining on roll.  UL Listed for direct burial.  Marine grade — extremely durable.

500’ roll
#22144
#23526
500'
250'
CLW102500
CLW102250
Lighting Wire - #12-2 No-Ox™ Tin-Coated

 

CAST Lighting #12-2 No-Ox® Marine-Grade Tin-Coated low voltage landscape lighting wire is highly corrosion resistant and retains its conductivity far longer than all-copper wire.  Wire is wound and shrink-wrapped in 500 ft. spools.  Marked with feet remaining on roll.  UL Listed for direct burial.  Marine grade — extremely durable.

250' or 500’ roll
#22143
#23524
500'
250'

CLW122500
CLW122250

Lighting Wire - #16-2 No-Ox™ Tin-Coated

CLW162500

CAST Lighting #16-2 No-Ox® Marine-Grade Tin-Coated low voltage landscape lighting wire is highly corrosion resistant and retains its conductivity far longer than all-copper wire.  Wire is wound and shrink-wrapped in 500 ft. spools.  Marked with feet remaining on roll.  UL Listed for direct burial.  Marine grade — extremely durable.

500’ roll
#22145  
 
Lamps
Lamps - MR16

 

All MR-16 lamps are sealed to prevent reflector surface from moisture that can lead to chipping or flaking.
12 volt.

Beam angles:
12˚ - narrow spread
24˚ - medium spread
36˚ - wide spread
60˚ - extra wide spread
#22223
#22224
#22225
#22226
#22227
#22228
#22229
#22230
#22231
#22232
#22233
#22234
20 watt - 12˚
20 watt - 24˚
20 watt - 36˚
20 watt - 60˚
35 watt - 12˚
35 watt - 24˚
35 watt - 36˚
35 watt - 60˚
50 watt - 12˚
50 watt - 24˚
50 watt - 36˚
50 watt - 60˚

AESXC
ABBFC
ABABC
ABAB60C
AFRBC
AFRAC
AFMWC
AFMW60C
AEXTC
AEXZC
AEXNC
AFNVC

Lamps - PAR-36

 

 
12 volt.
#28729

 

35 watt - 30˚
Lamps - Wedge Base Krypton

 

   
#22777
 
25 watt - 5,000 hours C3156K
Lamps - Xenon Halogen

 

   
#22961
#22235
 
10 watt - 10,000 hours
20 watt - 10,000 hours
C2H1210WSCB
C2H1220WSCB
     
 

 
      If you have any questions about this site, please contact us at info@bissettnursery.com
or (631) 289-3500.   © Copyright 2011  Bissett Nursery Corp.